Installation of tensile and annular resistance devices in Kosovo
Sanaf Electronic Industries Company, due to proper marketing and advertising, succeeded in selling the universal tensile testing machine to the largest manufacturer of single-walled and double-walled polymer pipes in Kosovo. It should be noted that due to the existing conditions and travel restrictions caused by Covid 19, all steps of installation, installation and training of the device were done online and remotely
| Repair and update MFI made by Ceast / Instron | ||||||||||||||||||||
|
Due to the existence of sanctions and the impossibility of receiving services from the main manufacturer, at the request of Navid Zar Shimi Company, Sanaf Electronic Industries Company repaired and overhual melt flow index device (MFI – MVR) made by Ceast Instron Company. And made it possible to use and reuse this device |
| Purchase of the device by Miandoab Petrochemical MFI | ||||||||||||||||||||
|
Sanaf Electronic Industries Company succeeded in concluding a contract with Miando Ab Petrochemical Complex to purchase a fully automatic MFI device for measuring the density of molten materials and high MVR of materials. This device was successfully installed in that complex in May of 1999 |
| Export of carogit pipe production laboratory equipment to Qatar | ||||||||||||||||||||
Following the presence of Sanaf Electronic Industries Company in the Plast Eurasia 2019 International Exhibition, the export of the company’s knowledge-based products to the countries of the Persian Gulf has increased
The company’s latest contract was signed with one of the largest production holdings in Qatar. In this contract, it was decided to equip the carogit pipe production laboratory by Sanaf Electronic Industries Company
Due to the sensitive economic conditions of the country in the fight against coronavirus, the export of knowledge-based products is of particular importance
| Construction of FPV system for the first time in Iran | ||||||||||||||||||||
Relying on the technical knowledge of its engineers, Sanaf Electronic Industries Company succeeded in producing and operating a system for checking the pressure of the extruder filter for the first time in the country
The performance of this system is based on the pressure before and after the filter and the differential comparison of this value
Prior to this, the system was produced only in Germany and the United States
| Export of polymer laboratory equipment to Uzbekistan | ||||||||||||||||||||
|
Sanaf Electronic Industries Company succeeded in exporting its knowledge-based equipment to Uzbekistan |
| Repair and upgrade of COF machine made in Germany dürbusch | ||||||||||||||||||||
|
The guild company succeeded in repairing and updating the COF machine made in Germany by dürbusch |
| Eurasia Plastic Exhibition Istanbul 2019 | ||||||||||||||||||||
| Plastics and Eurasia Industries, Turkey (PLAST EURASIA) from December 13, 2013 in Istanbul, Turkey. Plastic Exhibition and Eurasia Industries, Turkey (Plast Eurasia) was the largest plastic exhibition held in the Eurasia region. This exhibition was held in partnership with the Turkish Plastic Industry Organization and was an opportunity to engage in trade with other companies and international brands. Valid universal plastic production machinery, chemicals and raw materials, machinery and industries, heat and control equipment, mold, hyrdraulic and pneumatic, recycling methods, and so on. The exhibition was an opportunity to attend international markets, and in particular finding mass markets in the Orvascia region, and hence very important. Discover the latest technologies, your brand registration and your brand recognition to the world and B2B meetings, the development of business strategy and compare prices and products have benefited from the presence of the Turkish plastic exhibition |
| Seventh Exhibition Equipment and Laboratory Materials Azar 1398 | ||||||||||||||||||||
In order to support the national production and the realization of resistive economics, scientific and technology departments over the past years have always supported the technologies of the country to build in imported equipment, which, as a result, has been a significant number of advanced laboratory equipment and materials in the country. Therefore, in order to reduce the dependence of internal laboratories to imported equipment and materials, as well as the use of internal capabilities and support for the activities of students, the construction of equipment and production of laboratory materials, scientific assistant and presidential technology has so far six “Equipment and Laboratory Materials Exhibitions” From 1392 to 1397, its seventh period was held from December 26-29 in the permanent place of the Tehran International Exhibition
| First International Conference on Iran’s Rheology | ||||||||||||||||||||
According to the Iranian Rheology Association and in collaboration with the Faculty of Polymer Engineering and Color of Amir Kabir University of Technology, the Polymer Science and Engineering Association and the Iranian Polymer and Petrochemical Research Center, the first international conference of rheology was held.
The axes of this conference include
Suspension and colloy
Between the surface router of emulsions and joules
Polymeric alloys and nanocomposites
Non-Newtonian fluid mechanics
Electromagnetic fluids
Cosmetic and pharmaceutical food
Simulation and computational rhythology
Oil and petrochemical industries
Surface coatings and ostensive systems
Rubi in qualitative control of materials and processes
| Export of polymer laboratory equipment to Azerbaijan | ||||||||||||||||||||
The largest polymer production company in Azerbaijan completed its laboratory equipment with the company’s devices … Azretold Company Azararbaijan, which was earlier than this customer, was the equipment of the company, once again to complete the laboratory equipment to the siza company
| Exporting knowledge equipment to three new customers in Turkey and Morocco | ||||||||||||||||||||
|
The company’s electronics industry has managed to export knowledge equipment to three new customers in Turkey and Morocco |
| Repair and update of MFL Germany | ||||||||||||||||||||
The company, according to its abilities in the Economy and Loceland, was able to repair and update the daily device of MFL Germany to Pedo Bushehr Nedopan
| Export of Knowledge Equipment to Georgia | ||||||||||||||||||||
Knowledge of the Knowledge of the Snapan Electronics Industries, with the use of experienced forces and the use of the latest methods of the day of the world, was able to produce a range of equipment and devices with the quality of their foreign counterparts and, on the other hand, was able to prove It is greatly attracted the trust in intra-boundary companies. One of them is to export laboratory testing devices and industrial automation to Turkey and other neighboring countries
Hence, according to Georgian Pipe Georgia, the equipment for testing equipment, traction, and so on, was delivered to the company
It should be noted that the company’s construction devices have one year warranty and 10 years after sales service
| The presence of Sanaf Company at an innovation exhibition in the Iranian Polymer Research Center | ||||||||||||||||||||
The company’s electronics industries revealed its latest technologies in terms of its high scientific advances
The TGA, except for the most advanced production equipment, was presented at the fair
| Export to UAE. Turkey last month | ||||||||||||||||||||
| Send two cargo export to UAE. Turkey last month |
| Construction of the New Factory of Sanaf Company | ||||||||||||||||||||
In order to increase the production of the company in the export of knowledge of the new factory, the company was constructed under the basis of 1500 square meters under construction
| System Switching and Update Gotech | ||||||||||||||||||||
|
The company, according to its technical knowledge, once again succeeded in repairing the company Gotech and the software will update it |
| Successful presence at the PLAST EURASIA 2017 Exhibition | ||||||||||||||||||||
The company’s electronics industry company, as the largest exporter of quality control equipment, was founded in the 27th International Exhibition of Istanbul EuroPlast. Valid companies from more than 55 countries such as US countries, China, Russia, England, South Korea and Denmark attended the exhibition to display the latest achievements of the polymer, rubber and plastic industry
The company, which has always been a leading technology for upgrading quality control devices and industrial automation, has been present alongside the largest manufacturer of quality control devices such as Devotrans, Zwick, IPT and … at the exhibition. The latest manufacturing technology in the ultrasonic online thickness devices, measuring the flow rate of the melt, measuring the percentage of soot and
Increasing the export of the company’s products, the presence of international arenas and awareness of the progress and latest technology used in other international companies, has been the achievement of attendance at the exhibition
| Attending the Interplastica Moscow Exhibition, Russia | ||||||||||||||||||||
The company will be present at the Interplastica Exhibition on February 3 – 6, this valid exhibition will be held at the University of Moscow Exhibition Center in Russia
The smooth company looking for expanding its international market is always for the pioneering international exhibitions of Iranian companies
| Quality is more important or price | ||||||||||||||||||||
Judging with you …. Which one do you like more: Low quality, inappropriate service for low-priced devices or proper services, switching warranty, export quality and little price
What is the reason for the ship’s 11 OIT device to the warehouse of the company’s substituting companies? Why is the low price for some seductive
If we do not consider the price discussion why Chinese brands are not more expensive than any post-service service
If we spend, why are some manufacturing workshops for the Iranian brand name? Why do you get Iranian brand? Is it so hard to produce a quality product that does not match your finished price
Or customer trivial for you? Why and do not follow such that
| Concluding cooperation agreement in the field of export | ||||||||||||||||||||
|
Two large corporations of the company’s electronics and dynamic Polymer Co., Tehran concluded an agreement on exports to CIS countries, this contract for sale and export of products in Azerbaijan, Armenia, Uzbekistan, Turkmenistan, Tajikistan, Kyrgyzstan, Kazakhstan, Moldova, Georgia and Russia |
| Export devices; Percentage of soot, DSC and Microscope to Azerbaijan Azertexnolayn Foreign Company | ||||||||||||||||||||
Knowledge of the Knowledge of the Snapan Electronics Industries, with the use of experienced forces and the use of the latest methods of the day of the world, was able to produce a range of equipment and devices with the quality of their foreign counterparts and, on the other hand, was able to prove It is greatly attracted the trust in intra-boundary companies. One of them is to export laboratory testing devices and industrial automation to Turkey and other neighboring countries
Therefore, at the request of the foreign company Azertexnolayn Azerbaijan, equipment ranging from; The percentage of soot, DSC and MicroScope was delivered to the company
It should be noted that the company’s construction devices have one year warranty and 10 years after sales service
| Repair and update Gravel Meter | ||||||||||||||||||||
The company has repaired and updated and updated and updated on Mehr Advavand for several times the MSC
Since some domestic companies do not comply with the necessary standards and points in making the equipment, and even sometimes do not know the functional principles of the construction of the device, they are producing quality equipment, which unfortunately after a short term of the device, the device, Consumers are faced with many problems. Therefore, companies are recommended before purchasing equipment from their quality and efficiency
And customers need to pay attention that companies that need to change their official brand to attend valid exhibitions to count, can not be reliable
| Sales of 60 tons to Tabriz University of Tabriz | ||||||||||||||||||||
|
At the request of the University of Tabriz, the need for 60 tons, the company’s electronics industry has delivered this device to the university. This device consists of pockets, flexural, compressive, short core extensometer, metallurgy microscopy and … also have been Since companies, industries and academics prefer the most quality type of relevant devices to achieve the most accurate and reliable results of the analyzes and tests, the company’s electronics industry company, using the most recent methods of the world’s day, below Experienced expert opinion, step in producing a variety of equipment and has been able to greatly attract industry trust and other fields |
| Exports of the circular resistance of the company to Turkey | ||||||||||||||||||||
Knowledge of the Knowledge of Electronics Industries, so far managed to export several laboratory equipment to Turkey, has continued its export process to export a circular resistance device to this country. This was not possible except by the efforts of the engineers of the company and respectable management, it is not possible. Increasing the export process in the company helps to develop the laboratory equipment manufacturing industry and make technical progress of this equipment
| Update and repairing the device measuring the melt flow rate by the company by the company | ||||||||||||||||||||
The company has provided services in line with the replacement and repair of external and domestic equipment that have not been required. This has led to reorganize many of the country’s test equipment
The company has always been seeking to increase the quality of the products of the company, relying on the technical knowledge of experts. The company has always been looking for providing the best after-sales service to our customers with the alignment of reputable European and American companies
The Sanaf Company has repaired and updated the MFI device. This device was outside of Yazd Polyethylene Company due to lack of proper temperature control and not providing after-sales service by the manufacturer. The following actions were made to update this device
- HMI installation to display temperature and time and adjust device to reach the specified temperature
- Install the PLC and switch the temperature control system
- Replacing Dai
After the mentioned measures and verification of performance, this MFI device has been used again in the Quality Control Laboratory of Yazd Polyethylene Company
| Replacing the CBC device making one of the domestic companies | ||||||||||||||||||||
The company’s electronics industry has been replaced by the percentage of soot the construction of one of the domestic companies with the soot test device for the construction of the company
Unfortunately, some domestic companies do not comply with the necessary standards and create problems for consumers. It is necessary to pay attention to the points above before purchasing the device
The manufacturing devices of the company are manufactured in accordance with the latest national and international standards and are made with the best parts. Also, all devices have one year warranty and 10 years after-sales service
| Replain DSC Device Construction of China | ||||||||||||||||||||
The company has already provided services in line with the replacement and repair of external and domestic equipment that has not been required. This has led to reorganize many of the country’s test equipment
The company has always been seeking to increase the quality of the products of the company, relying on the technical knowledge of experts. The company has always sought to provide the best after-sales service with its customers with the alignment of prestigious European and American companies
The company has replaced the DSC device manufacturing China brand ZUFA with the latest DSC device manufacturing company. Due to the presentation of post-sales services by Chinese vendors and low quality, the performance of this device has been accompanied by problems
Striking the activists of the polymer, rubber and plastic industry, please have enough precision when purchasing laboratory equipment and refrain from purchasing a quality and after-sales service. Because the duration of function without the forms of these devices is very short and will not be used after any hardware problem or software. Importing a device will not guarantee its quality
| Replacing the device soot the construction of one of the domestic companies | ||||||||||||||||||||
|
The electronics industries company replaced the soot of the soot of one of the domestic companies with a percentage of soot. The company has provided several services in line with the replacement and repair of external and domestic equipment. This has led to reorganize many of the country’s test equipment The manufacturing devices of the company are manufactured in accordance with the latest national and international standards and are made with the best parts. Also, all devices have one year warranty and 10 years after-sales service Unfortunately, some domestic companies do not comply with the necessary standards and create problems for consumers. It is necessary to pay attention to the points above before purchasing the device |
| Export Full Equipment Pack to Azerbaijan | ||||||||||||||||||||
Knowledge of the Knowledge of the Snapping Electronics Industries with experienced forces and the use of technical knowledge of the world has managed to export laboratory testing devices and industrial automation to Turkey and other neighboring countries
The company, so far managed to export 9 9th full-time laboratory equipment, has been sent to Turkey, following its export process, this time, this time sent the first pack of susaf equipment in 1396 to Azerbaijan. This was not possible except by the boarding effort of the engineers of the company and the respectable management of the
It is hoped to increase the export process in the company to help develop the laboratory equipment manufacturing industry and make technical progress of this equipment
| Provide after-sales service to Deltated Company | ||||||||||||||||||||
After-sales service is an important factor in buying laboratory testing devices. The company has always been a campaign in providing after-sales service. Also due to the technical ability of this company has always been trusted in various industries to provide services for repairing and updating the internal and external devices
In this regard, the company participated in cooperation with a valid Deltate company, active in the production of composite parts, and providing after-sales services to satisfy and receive apprenticeship from it
| The presence of the company’s electronics industry in the second national conference | ||||||||||||||||||||
The company is proud to announce their membership in the Iranian Rheology Association and its presence as a sponsor on the second-day national conference on the role of rheology in related technologies
Following the construction of the first revelation of the company, the company, with membership in the Iranian Rheology Association and attending the rheological conference, seeks to enjoy the opinions of experts, experts and experts in the field to enhance the quality and improvement of this product
The conference will be held on Tuesday, June 2, 1396 at the Polymer and Color University of Amir Kabir University of Technology. Conference axes are
Basics of rheology and its relationship with various industries
The role of rheology in the fraction of polymers
Role of rheology in pharmaceutical and substance industries
The role of rheology in oil industries
Role of rheology in food industry
The second national conference includes the presentation of the papers in the form of posters and performing key lectures by professionals of rheological science indexes in the subject of the conference and holding of a rheometry workshop. The company invites all professors, researchers of scientific and industrial centers and rheological professionals to play their presence in holding this conference
| Attending 20 mines of Iran Helleth 1396 | ||||||||||||||||||||
The company’s electronics industry in the Pavon Knowledge Products is present in the 20th mines of Iran Helleth 1396
The exhibition is held on May 25-22 in Tehran’s permanent place, as well as the company’s company in the Pavon Products of the Knowledge of Beneficiary in the Milad Hall
International Exhibition of Medical Equipment, Dentistry, Laboratory, Pharmaceutical and Health Services with 18 years of experience, as the second major occurrence in the field of medical equipment, dentistry, laboratory, medicine and health services in the region, which is annually in the field of health and license The Iranian Trade Development Organization and the cooperation of the International Exhibitions of the Islamic Republic of Iran and the Ministry of Health and Medical Education are held May every year at the permanent site of Tehran International Exhibitions, and more than 20,000 visitors visited the exhibition annually. Acting. The International Exhibition of Iran Hellt provides an opportunity to activators in this field can better communicate with managers of hospitals and health centers at the level of countries. Also, attending commercial meetings and conferences and lateral programs can provide a suitable platform for familiarity, interaction and development of companies in addition to promoting the level of knowledge and knowledge of producers and researchers. To showcase the abilities of the Iranian health industry, unveiling the technology of the world, promoting tourism tourism, supporting manufacturers and elite entrepreneurs and communication with health and educational centers, is one of the goals for holding the exhibition
| Successful and successful presence of the sanaf in the twenty-second international oil and gas exhibition | ||||||||||||||||||||
| The company has always tried to participate in a variety of international domestic and exhibition abilities in promoting their technical and qualitative capabilities of their products, according to the pre-step in making a variety of new test products and the global thermal analysis. Iran tries and the scientific capacity of the company kills the foundation of domestic and foreign companies |
| Successful presence at the Iranian Fair 1396 | ||||||||||||||||||||
The Knowledge Company of the Sanaf was present at the fifth term of the exhibition of equipment and laboratory materials in Iran. The company has been in the 40 booths No. 20 booths, researchers, university professors and students. The company participated in this course with more diverse products than previous periods. The online ultrasonic thickness device, mass thermal analysis, STA device and Nach woman’s device have been added to the company’s products in this period
327 companies attended the exhibition and displayed their latest products. The company’s electronics industry, which has always been a leading company in the production of high-tech products, has been widely involved in this important national exhibition. The products of the company were considered to be the respectable professors of universities and industrial activists
Brgzary and exhibition of Iranian National Laboratory Equipment boost production and increase the share of domestic products is the sale of laboratory equipment
| The presence of the company in domestic exhibitions | ||||||||||||||||||||
Knowledge of the founder of the company’s electronics industry, relying on the most advanced technology technology in the world, has been working on designing and manufacturing various industrial automation devices and laboratory qualitative control
The company has always had effective and continuous presence in international exhibitions such as Arablab and Arabplast and Plast Eurasia, in addition to the role of having in foreign markets with products with enjoyable forces in the construction and engineering of laboratory testing devices. New science is also familiar with this. The company seeks to localize these sciences and, if possible, work in making their devices. The electronics industry successfully succeeded in sending its export process to send the 9th complete laboratory equipment in 1396, and now more than 25 industrial centers in Turkey are equipped with laboratory equipment and qualitative control of the company
Among the internal exhibitions that the Electronic Industries Company will be active in its active attendance equipment and laboratory laboratory materials (May 4-7, 1396 – Tehran International Exhibition – Salon 40 A Booth 20) and twenty The second international oil, gas, refining and petrochemical exhibition of Iran (May 16-13, 1396 halls 26E booth)
The exhibition of equipment and laboratory materials in Iran is formed in order to introduce and supply products made in the country with indigenous technology and competitive with foreign products. Providing appropriate after-sales services and having the necessary approvals and technical standards in accordance with the standards of the world, including the necessary conditions for participating in this exhibition
The International Oil, Gas, Refinement and Petrochemical Exhibition of Iran as the largest industrial and commercial event in this area, which is established annually with the presence of a large number of domestic and foreign companies in the field of oil, gas, refining and petrochemical industry, is very much Magnificent so that active companies in this industry are conscious in order to compare and procure their required devices
| Export 9th complete laboratory equipment to Turkey | ||||||||||||||||||||
Knowledge of the Knowledge of the Snapping Electronics Industries with experienced forces and the use of technical knowledge of the world has managed to export laboratory testing devices and industrial automation to Turkey and other neighboring countries
The company successfully succeeded in sending its export process to send the 9th complete laboratory equipment in 1396 to Turkey. This was not possible except by the boarding effort of the engineers of the company and the respectable management of the
It is hoped to increase the export process in the company to help develop the laboratory equipment manufacturing industry and make technical progress of this equipment
| Repair and update of Petrochemical Test Testing Testing machine | ||||||||||||||||||||
The experienced engineers of the company succeeded in repairing the construction machine to build Germany Thümler, which did not fit after-sales service
Changes made on this device are as follows
Create a PLC Control System
Software update
Adding the ability to calculate elastic modulus, three-point bending and other tests related to daily devices of the sanaf
After-sales service is an important factor in buying laboratory testing devices. The company has always been a campaign in providing after-sales service. Also due to its technical ability of the company has always been trusted in various industries to provide services for repairing and updating external or internal devices
Made of flexibility test machine (Mandrel Flexibility Tester)
For the first time in the country, the Mandrel Flexibility Tester was designed and built by the company’s electronics industry. This device is in accordance with the CSA Z245 and ISO 21809 standards and has 14 cylindrical molds to diameter 2/3/4/5/6/8/16/13/16/19/20/25/32 in Dimensions of millimeters are used to control the quality of the tube flexibility and polystyrene coatings
| Repair and update of Khuzestan Petrochemical Test Test | ||||||||||||||||||||
The experienced engineers of the company succeeded in repairing the construction of Hounsfield England. Changes made on this device are as follows
Repair the pneumatic structure of clamps
Create a PLC Control System
Create remote for controlling the movement of jaws
After-sales service is an important factor in buying laboratory testing devices. The company has always been a campaign in providing after-sales service. Also due to the technical ability of this company has always been trusted in various industries to provide services for repairing and updating external devices
| Construction of the Hot Water Soak test device | ||||||||||||||||||||
The Hot Water Soak was created for the first time in Iran to meet the research and design unit of the company. This device was designed to order pipes and polymer coatings under the standard NACE RP0394. From the equipped equip to rank the adhesion properties of the coatings after a long time in hot water
The characteristics of this device control its temperature over a long time and corrosion resistance and rust all of its parts
| Repair and update the daily device produced in China | ||||||||||||||||||||
The experienced engineers of the company succeeded in repairing China’s stretching device that did not fit after-sales service
Changes made on this device are as follows
Repair the structure of clamps
Create a PLC Control System
Create remote for controlling the movement of jaws
After-sales service is an important factor in buying laboratory testing devices. The company has always been a campaign in providing after-sales service. Also due to its technical ability of the company has always been trusted in various industries to provide services for repairing and updating external or internal devices.
| Send equipment a complete ecoded laboratory to Turkey | ||||||||||||||||||||
Şirketin elektronik endüstrisi, mühendisler için birçok çabasıyla, Türkiye’de sekizinci tam laboratuvarı 1395’te donatmayı başardı. Bu laboratuvar İzmir Türkiye şehrinde yer almaktadır ve traksiyon test makinesinin ekipmanı, dairesel direnç test makinesinin, Darbe Test Test Cihazı, Erimiş Akış Test Cihazı, Termal Analiz ve Yoğunluk Belirleme Cihazı’na sahiptir
Elektronik mühendislerin ve saygın yönetimin yatılı çabası dışında bu artık mümkün değildi
Ülkedeki tüm şirketlerin ulusal ürünlere ve kalitelerine güveneceği umulmaktadır
| Successful presence at the 2017 Arabplast Exhibition | ||||||||||||||||||||
The presence of the company’s electronics industry in the second and largest plastic industry exhibition in the world
The Arab Plast 2017 exhibition, which was available on January 1395, with more than 850 international international companies at the World Trade Center Dubai.
This exhibition, which humbled geographical location in terms of proximity to one of the most important fairs of the world’s largest petrochemical hub is
| Successful presence at the PLAST EURASIA 2016 Exhibition | ||||||||||||||||||||
The company’s electronics industry company, as the largest exporter of quality control equipment, was founded on the 26th International Exhibition of Istanbul EuroPlast. Valid companies from more than 55 countries such as US countries, China, Russia, England, South Korea and Denmark attended the exhibition to display the latest achievements of the polymer, rubber and plastic industry
The company, which has always been a leading technology for improving the technology of quality control and industrial automation, has been present alongside the largest manufacturer of qualitative control devices such as Devotrans, Polinar, and … At the exhibition and the latest technology Construction on ultrasonic online thickness devices, measuring the melt flow rate, measuring the percentage of soot and
Increasing the export of the company’s products, the presence of international arenas and awareness of the progress and latest technology used in other international companies, has been the achievement of attendance at the exhibition
| Replain DSC Device Construction of China | ||||||||||||||||||||
The question here is that manufacturers and industries that the protest protesters of the import of foreign quality or producing products outside the standard range are by some domestic producers with a low price, why they buy equipment, which is in terms of quality, efficiency and After-sales service does not have enough requirements
The company has provided services in line with the replacement and repair of external and domestic equipment that have not been required. This has led to reorganize many of the country’s test equipment
The company has always been seeking to increase the quality of the products of the company, relying on the technical knowledge of experts. The company has always sought to provide the best after-sales service with its customers with the alignment of prestigious European and American companies
The company has replaced the DSC device manufacturing China brand ZUFA with the latest DSC device manufacturing company. Due to the presentation of post-sales services by Chinese vendors and low quality, the performance of this device has been accompanied by problems
Striking the activists of the polymer, rubber and plastic industry, please have enough precision when purchasing laboratory equipment and refrain from purchasing a quality and after-sales service. Because the duration of function without the forms of these devices is very short and will not be used after any hardware problem or software. Importing a device will not guarantee its quality
| The presence of Sanaf Company at the Arab Lip International Exhibition 2017 | ||||||||||||||||||||
The company has always been a leading company for international exhibitions as the most important company in the export of qualitative control equipment in Iran. In this regard, after participating in the Europlast International Exhibition of Turkey, the company will attend the Arab Lip International Exhibition
The international Arab Lip exhibition is active in nanotechnology, bio, food, petrochemical, pharmaceutical and chemical laboratories. The exhibition will be held on March 30, 1395 to April 1396 in Dubai, United Arab Emirates. More than 900 credible international companies will be present at the exhibition. The ASTM International Institute supports the exhibition. Given the international importance of the exhibition, the company will also be present in this international arena. The company will attend the S1 of the 850 and 860 booths to continue to increase the range of export products and be informed of the latest international and valid companies’ technologies
| Full equipping another lab in Turkey in 2016 | ||||||||||||||||||||
Yen 8th times during the current year of the company’s electronics industries failed to fully equip a polymer laboratory overseas
The lab, located in Malatya in Turkey, equipment such as stretching machine, CNC sampling machine, DDC thermal analysis and induction oxidation analysis, weight loss test device, hydrostatic testing machine for polymer tubes from The company has been prepared
Hope, with this, the company has taken a small step in the field of exporting non-existent products for our beloved country
| The presence of the company at the Arab Plast 2017 exhibition | ||||||||||||||||||||
The presence of the company’s electronics industry in the second and largest plastic industry exhibition in the world
The Arab Plast 2017 exhibition, on January 2015 at the Dubai World Trade Center, is one of the most important exhibitions in the region in terms of the world’s largest petrochemical pole.
| Purchase of Chinese quality equipment for productive manufacturing companies | ||||||||||||||||||||
The company has provided services in line with the replacement and repair of external and domestic equipment that have not been required. This has led to reorganize many of the country’s test equipment
The company has always been seeking to increase the quality of the products of the company, relying on the technical knowledge of experts. The company has always been looking for providing the best after-sales service to our customers with the alignment of reputable European and American companies.
With other non-sale after sales services, companies imported Chinese laboratory products, one of the domestic companies to replace the device
The Golden Shoot Company of Esfiane, who is a record and old-fashioned pipe company in Iran, has requested the molten indicator device available in their lab due to lack of efficiency and lack of proper services from the imported company with the machine produced by the electronics industry. Self replaced
From honorable companies and laboratory authorities, we will be careful about their laboratory equipment and make sure the supplier of the company
| Making a dart hit test device | ||||||||||||||||||||
With the Effort and Effort of The Company for The First Time in the Country, The Above Equation Was Ordered to Order a Number of Polymeric Film and Fibers Industries. This Equip is Made According to the International Standard ISO 7765, ASTM D1709, and Its Features Can be Made to Magnetic Cuisine of Weight Release, PLC Controller, Touch Software Page, Software with Capability to display All Test Information, Easy Calibration Functionality
This Device Is Used in Film Industry, Paper and Cardboard, Textiles, Non-Woven Fabrics and Woven Bags, Rubber, Aluminum Foil, Aluminum Foil Composite Film and Metal Products, ETC
| Increased calibration lab domain | ||||||||||||||||||||
With the great effort of laboratory authorities, the company, the company first succeeded in obtaining a certificate of calibration of the calibration of the thermal weighing device (TGA)
Also, by increasing the amplitude of the calibration range of differential thermal analysis (DSC), it is now able to calibrate this equip to 1000 ° C, and according to the need for the company in the field of calibration of force for universal testing equipment, now the company’s ability to perform calibration to calibrate until The capacity has 20 tons, and this did not work without effortlessly attempting to work on the laboratory of the company, Mrs. Asadi Engineer and Mrs. Farahani
This certificate of qualifications confirmed on 1395/06/23 for the third year with the 2914 / T license number
http://www.tehranstandard.org/pr/labs/labdetails.aspx?labID=602&keyword=????
| Construction of the first desktop friction coefficient test machine | ||||||||||||||||||||
With the effort and effort of the research and design unit of the company for the first time in the country, the above equation was ordered to order a number of polymeric film and fibers industries. This equip is based on the International ASTM 1894, and its features can be measured at the same time as static and animated friction coefficient simultaneously, PLC controller, high resolution load cell, software with capability to display all test information, calibration cake period Easy and … mentioned, also in terms of the price, this device also has 20% of the European sample cost
This device is used in film industry, paper and cardboard, textiles, non-woven fabrics and woven bags, rubber, aluminum foil, aluminum foil composite film and metal products, etc
| Repairing the daily device produced in one of the domestic companies in the buds of Pars | ||||||||||||||||||||
The daily device of Pars scanning company was repaired by the company. The company has always been looking for the best technical services. In this regard, industrial owners will trust the company to repair and update their devices and give repair and updating their devices to the company. The daily buds of Pars scanning company were also repaired due to shortness of the machine and software problems
The following changes are performed on the daily device
A) Increased device course up to 150 cm
B) PLC control system
C) A suitable hardware system with Software Software
| Construction of cable and wire ignition testing | ||||||||||||||||||||
Cable and wire flammability test is one of the most important qualitative control tests for cable production industries. This device is built with the highest level of authentic function and observance of safety tips at the company
The technical specifications of this device matches the following
In accordance with IEC 60332-1 & 2
Dimensions 60 * 84 * 120
Torch in accordance with the Governor IEC 695-2-4 / 1 with 1KW heat adjustment
Nutrition feature in different ministers
Has a touch screen to display temperature and test time
PLC control system
Show flue temperature and flame temperature
Auto fan function
Has programming arrangements for safety and avoid fire
Auto-gas connection by electric milk
Ability to adjust test time and has alarms alarms after completing test time
Automatic
| Construction of cable hit testing machine | ||||||||||||||||||||
The cable hit test machine was built three stations in the company
This device is built according to the ISIRI 5525-1-4 standard and has a weight of 100 g to 750 grams. Of this device is used to perform a test at low or high temperature
| CE Certification by Sanaf Company | ||||||||||||||||||||
Sanaf Company The largest export of laboratory testing equipment in Iran managed to obtain CE certificate. Extensive exports of the company to Turkey, Iraq, Tajikistan and … have always made the quality of the company’s products. The quality of the company’s quality of products to export to Europe has been essential and important. The quality of devices generated in the company has international standards and is competitive in the regional market with other companies
| Repair and update Testing Testing Making Hounsfield England in Razi Metallurgy Research Center | ||||||||||||||||||||
The experienced engineers of the company succeeded in repairing the construction of Hounsfield England. Changes made on this device are as follows
Repair the pneumatic structure of clamps
Create a PLC Control System
Create remote for controlling the movement of jaws
After-sales service is an important factor in buying laboratory testing devices. The company has always been a campaign in providing after-sales service. Also due to the technical ability of this company has always been trusted in various industries to provide services for repairing and updating external devices
| Repairing the Ultrasonic Ultrasonic Thickness Machine produced by the company | ||||||||||||||||||||
Sanaf Company experienced engineers managed to repair this online ultrasonic thickness gauge construction companies were INOEX
| The presence of Sanaf Company in the fourth period of the exhibition of equipment and laboratory materials in Iran | ||||||||||||||||||||
Knowledge of the foundation of the sanaf was present in the fourth period of the exhibition of equipment and laboratory materials in Iran. The company has been in the B of the B 31 booth number 42 of the artisans, researchers, university professors and students. The company participated in this course with more diverse products than previous periods. The online ultrasonic thickness device, a distributed thermal analysis, STA device and Nach woman’s device have been added to the products of this company in this period
327 companies attended the exhibition and displayed their latest products. The company’s electronics industry, which has always been a leading company in the production of high-tech products, has been widely involved in this important national exhibition. The products of the company were considered to be the respectable professors of universities and industrial activists
.Brgzary and exhibition of Iranian National Laboratory Equipment boost production and increase the share of domestic products is the sale of laboratory equipment
| The presence of the company’s electronics company at the 10th International Exhibition of Iran Plast | ||||||||||||||||||||
The company’s electronics industries attended April 25-29 in the 10th International Exhibition of Iran Plast. The company in Hall 6, the 28th booth, has been accepted by polymer industry activists, researchers, students and enthusiasts. More than 20 types of products were exhibited at the exhibition, and the industry became acquainted with the latest achievements and technologies of the company, including the ultrasonic thickness device with fixed sensors, Nach woman’s device , TGA device, soot distribution test software and new types of DSC apps
| The company’s electronics industries attended the 2016 Arab Lip International Exhibition | ||||||||||||||||||||
Knowledge of the Knowledge of the Sanaf Electronics Industries attended April 95th in the Arab International Libe International Exhibition. Corridor of Export Services Export Products Scientific and Presidential Assistant Professor and Presidential Technology from the Superior Student Institute of Laboratory Equipment for the 2016 Arab Liber Exhibition, in the form of Iran’s National Pavilion, has supported the exhibition that the company is also for this financial support has taken
Increasing export rate, more familiar with the latest achievements of international reputable companies, and the latest technology technologies of the company have been from the goals of the company at the exhibition.
In this period of the exhibition, a total of 927 companies from 42 different countries in the world attended the exhibition as a transition booth. In the meantime, Germany, England and China, with 163, 105 and 89, had the most colorful attendance at the exhibition. The number of visitors to this exhibition is also significant. During this period, 10,000 Arab lips exhibition visited 2016. Among the different countries of the United Arab Emirates (3,484), India (870), Saudi Arabia (828) and Turkey (422 people) had the largest number of visits
| Updating and repairing the machine measurement of the melt flow rate construction of Korean Mark Hanbec | ||||||||||||||||||||
The company has provided services in line with the replacement and repair of external and domestic equipment that have not been required. This has led to reorganize many of the country’s test equipment
The company has always been seeking to increase the quality of the products of the company, relying on the technical knowledge of experts. The company has always been looking for providing the best after-sales service to our customers with the alignment of reputable European and American companies.
Sanaf Company, the MFI device has been repaired and updated by Hanbec. This device has been outside the laboratory of the Dynamic Polymer Company due to lack of proper temperature control and not providing after-sales service by the manufacturer. The following actions were made to update this device
- HMI installation to display temperature and time and adjust device to reach the specified temperature
- Install the PLC and switch the temperature control system
- Replacing Dai
After performing the measures and confirmation of performance, this MFI device is re-used in the quality control laboratory of the Dynamic Polymer Company
| Making machine in the company in the company | ||||||||||||||||||||
The experienced engineers of the company have succeeded in building a nachican machine to prepare the examples of the tests of the Asod and Charp
This functional device is accurately for a hundredth of millimeter and applied to the preparation of rubber and plastic samples
Depth
| The construction of the first TGA device in Iran by the company | ||||||||||||||||||||
The company will show the first TGA device in the Arab Lip exhibition on April 1-4, 1395. The TGA device is used to analyze the decomposition reaction, specify the amount of water in the substance, specifying the velocity of the evaporation in the mixture, specifying the purity of the material and
The performance of this device is up to 1000 ° C with a precision of 0.5 ° C. And has 1 micro-hot resolution. The gas atmosphere can be static or dynamics and inert gas or oxygen
| Repair Three Station HDT-VICAT Making Zwick Company | ||||||||||||||||||||
Experienced engineers for the first time in Iran managed to repair and update the device of three HDT-VICAT machines manufactured by Zwick
This device has two stations for testing VICAT and a station to perform the HDT test. Changes and modifications performed on this device are as follows
- Change the measurement of pressure and needle displacement
- Change the pressure and needle
- Changing the hardware controllers
- Run and install software generated in the company
| Repair and replacement of two daily devices making one of the domestic companies by the company of the company | ||||||||||||||||||||
The company’s electronics industry has managed to repair and update and replace two daily devices making one of the domestic companies
The manufacturing devices of the company are manufactured in accordance with the latest national and international standards and are made with the best parts. Also, all devices have one year warranty and 10 years after-sales service
Unfortunately, some domestic companies do not comply with the necessary standards and create problems for consumers. It is necessary to pay attention to the points above before purchasing the device
| Replacement of CNC Making Company IPT Germany with CNC Making Company | ||||||||||||||||||||
The company has provided services to replace and repair external and domestic equipment that have not had after-sales service. This has led to reorganize many of the country’s test equipment
The company has always been seeking to increase the quality of the products of the company, relying on the technical knowledge of experts. The company has always been looking for providing the best after-sales service to our customers with the alignment of reputable European and American companies
The company’s CNC company has replaced the IPT company with the latest CNC device manufacturing company. Due to the lack of post-sales services by German devices, the device has been accompanied by problems
| Replacing the device Determine the rate of melt materials making one of the domestic companies with the device determining the molten material manufacturing company | ||||||||||||||||||||
The company’s electronics company has managed to repair and update the molten flow rate building one of the domestic companies
The manufacturing devices of the company are manufactured in accordance with the latest national and international standards and are made with the best parts. Also, all devices have one year warranty and 10 years after-sales service
Unfortunately, some domestic companies do not comply with the necessary standards and create problems for consumers. It is necessary to pay attention to the points above before purchasing the device
| The presence of Sanaf Company at the Arab Lip International Exhibition in Iran Corridor S1 Saline 850 and 860 | ||||||||||||||||||||
The company has always been a leading company for international exhibitions as the most important company in the export of qualitative control equipment in Iran. In this regard, after participating in the Europlast International Exhibition of Turkey, the company will attend the Arab Lip International Exhibition
The international Arab Lip exhibition is active in nanotechnology, bio, food, petrochemical, pharmaceutical and chemical laboratories. The exhibition will be held on April 1 to 4 in Dubai, United Arab Emirates. More than 900 credible international companies will be present at the exhibition. The ASTM International Institute supports the exhibition. Given the international importance of the exhibition, the company will also be present in this international arena. The company will attend the S1 of the 850 and 860 booths to continue to increase the range of export products and be informed of the latest international and valid companies’ technologies
| Changing DSC DSC Making China, Mark ZFA Model ZF-DS-D2 with Advanced DSC Making Self-Manufacturing | ||||||||||||||||||||
The question here is that manufacturers and industries that the protest protesters of the import of foreign quality or producing products outside the standard range are by some domestic producers with a low price, why they buy equipment, which is in terms of quality, efficiency and After-sales service does not have enough requirements
The company has provided services in line with the replacement and repair of external and domestic equipment that have not been required. This has led to reorganize many of the country’s test equipment
The company has always been seeking to increase the quality of the products of the company, relying on the technical knowledge of experts. The company has always sought to provide the best after-sales service with its customers with the alignment of prestigious European and American companies
The company has replaced the DSC device manufacturing China brand ZUFA with the latest DSC device manufacturing company. Due to the presentation of post-sales services by Chinese vendors and low quality, the performance of this device has been accompanied by problems
Striking the activists of the polymer, rubber and plastic industry, please have enough precision when purchasing laboratory equipment and refrain from purchasing a quality and after-sales service. Because the duration of function without the forms of these devices is very short and will not be used after any hardware problem or software. Importing a device will not guarantee its quality
| Changing another DSC manufacturing device, ZFA Model ZF-DS-D2 with advanced DSC manufacturing devices | ||||||||||||||||||||
The question here is suggested that manufacturers and practitioners of industries that self-protocess imports of foreign quality products or out-of-standing products are by some domestic producers are low, why they buy equipment that are in terms of quality, efficiency And after-sales service does not have enough requirements
The company has provided services to replace and repair external and domestic equipment that have not been required. This has led to reorganize many of the country’s test equipment
The company has always been seeking to increase the quality of the products of the company, relying on the technical knowledge of experts. The company has always been looking for providing the best after-sales service to our customers with the alignment of reputable European and American companies.
The company has replaced another DSC device manufacturing Mark ZUFA with the latest DSC device manufacturing company. Due to the presentation of post-sales services by Chinese vendors and low quality, the performance of this device has been accompanied by problems
Striking the activists of the polymer, rubber and plastic industry, please have enough precision when purchasing laboratory equipment and refrain from purchasing a quality and after-sales service. Because the term without the forms of these devices is very short and will not be used after any hardware or software problem. Importing a device will not guarantee its quality
| Repair and update the device determines the melt flow rate making one of the domestic companies | ||||||||||||||||||||
The company’s electronics company has managed to repair and update the molten flow rate building one of the domestic companies
The manufacturing devices of the company are manufactured in accordance with the latest national and international standards and are made with the best parts. Also, all devices have one year warranty and 10 years after-sales service
Unfortunately, some domestic companies do not comply with the necessary standards and create problems for consumers. It is necessary to pay attention to the points above before purchasing the device
| Build new model of Eisood-Charpi | ||||||||||||||||||||
The experienced engineers of the company’s electronics industry have succeeded in making the upgraded and new associate model. Features improved in this model include the following
Create cover to protect user
Ability to calculate wasted energy for different picks
HMI Ability to display energy, energy on length and energy on area
| DSC Machine Repair of China, ZUFA Company (ZF-DS-D2 | ||||||||||||||||||||
Specialist engineers of the company, succeeded in repairing the DSC device manufacturing ZUFA China. Polymer-based polymer control devices made many problems with polymer industry activists due to undesirable quality of device components and not post-sales services
The actions taken to fix DSC devices build ZUFA company as follows
Replacing some electronic components
Replacing controllers
Furnace Replacement
| The presence of Sanaf Company in the 26th International Exhibition of Euro Avasia Istanbul Turkey | ||||||||||||||||||||
The company’s electronics industry company, as the largest exporter of quality control equipment, was founded on the 26th International Exhibition of Istanbul EuroPlast. Valid companies from more than 55 countries such as US countries, China, Russia, England, South Korea and Denmark attended the exhibition to display the latest achievements of the polymer, rubber and plastic industry
The company, which has always been a leading technology for improving the technology of quality control and industrial automation, has been present alongside the largest manufacturer of qualitative control devices such as Devotrans, Polinar, and … At the exhibition and the latest technology Construction on ultrasonic online thickness devices, measuring the melt flow rate, measuring the percentage of soot and
Increasing the export of the company’s products, the presence of international arenas and awareness of the progress and latest technology used in other international companies, has been the achievement of attendance at the exhibition
| Readiness for the company to attend Iran Plast Exhibition, Salon 6 Booth 28 | ||||||||||||||||||||
The company’s electronics industry will participate in the Iran Plast Exhibition. The company preheats respectful visitors in the booth 28 salon 6
The Iranian International Exhibition Plast is looking to provide a ground for boom in the domestic plastic market and facilitate global marketing process and the presence of this part of the country industry in global markets
This exhibition today is considered the largest plastic industry event in the Middle East and is classified among the world’s most prestigious plastic exhibitions
This exhibition has 9 successful courses behind. Statistical look at past periods shows that the exhibition has been able to grow up with all problems and problems. So that the number of participants in the exhibition has increased from 294 domestic and foreign companies in the first period to 760 domestic and foreign companies in the 9th period
According to planning, the 10th Iranian International Exhibition period on April 25 to 29, 1395 at the permanent site of international exhibitions in Tehran in four groups of raw materials, goods and semi-made, machinery and equipment and services Will be held
The power of getting the country’s plastic industry has only been one of the benefits of holding the exhibition. In addition, in the shadow of holding the exhibition, various formations were formed in order to be more effective in different parts of the plastic industries, which became an increasing competition and boom of this industry
The Iran-Plast Exhibition has been held in four groups of goods. These groups are as follows
Raw material
Raw materials for related industries
Goods made and semi-made
equipment and machinery
Measurement and Test – Other Machinery – Related Accessories
Services
With the importance of the exhibition, each period before the details of the exhibition are available to participate enthusiasts at the exhibition. This information is also included in the exhibition site
In summary, you can refer to the details of the exhibition as follows
Exhibition title: The Tenth International Exhibition of Iran Plast
Exhibition type: International specialized
Holding time: 25-29 April 1395 equal to 13 to 17 April 2016
Holding Place: The Permanent Place of Tehran International Exhibitions
Hits: 10 am to 4 pm
| The presence of electronics industries at the Turkish Plastic Exhibition Plast Eurasia 2015 Hall 5 | ||||||||||||||||||||
The electronics industry is the only export of laboratory equipment in Iran following a strong and strong presence at the Turkish Plastic Exhibition Plast Eurasia 2015. The company welcomes dear visitors in the 5th Hall
The company’s electronics industries, according to the proper quality of its own products, has been introduced to the sample of equipment produced in China, Taiwan, etc., as last year to compete with the equipment of these countries and the expansion of its international markets at this valid exhibition
| Building the Eiswood device for ceramics | ||||||||||||||||||||
|
The experienced engineers of the company have succeeded in building an associate device for ceramic products. This device is used to test the resistance of these products. Also, this device uses the widespread dimensions of ceramic and pottery products |
| Repair and update Metal flow rate (MFR) Jinjian Chengde model XNR-400 | ||||||||||||||||||||
The capable engineers of the company have managed to repair the MFR device “Chengde Jijian” China, the “XNR-400” model. The following services are performed to repair and update this device
Correction and repair of thermal controllers
Replacing Elements
Matching the device with the latest version of the software manufactured at the company’s electronics industry
Move the blade cutting machine
Install HMI
Perform calibration
The quality of after-sales service is an important criterion for the choice of the device, so the company’s electronics industry will be of honorable customers, which trust in domestic quality products instead of buying china quality products. Nevertheless, the experienced chowder of the company is able to provide the best after-sales service. In addition to providing after sales services, the company is also able to repair the produced devices from the country as well
| Repair of moisture testing and desktop temperature construction of Gotech in Maroon Petrochemical | ||||||||||||||||||||
The experienced engineers of the company’s electronics industry, relying on their technical knowledge and experiences, has managed to repair and update the Gotech Moisture Testing device and the GT-7005-T model in Maroon petrochemicals. It is worth noting that the manufacturer and importer company were not able to repair the device due to sanctions, and this device has been successfully repaired by domestic knowledge
| Implementation of the friction coefficient on Instron’s daily device | ||||||||||||||||||||
With the efforts of the researchers company, the COF Tester coefficient was installed on the Instron company. This device, designed with the order of Jam petrochemicals, is used to determine the coefficient of static friction and dynamics and has the following capabilities
- Load cell with accuracy of 0.01 Newton
- Ability to determine the friction coefficient of metal surfaces and samples-samples
| Launching the Instron Company Manufacturing | ||||||||||||||||||||
The engineers of the company, based on the technical knowledge and experiences of the Universal Tensile Tester, put and updated the Instron company. This device, which captures traction tests and circular stiffness on polymer samples, was launched and ready to be tested by installing the company’s construction software
| Along with this, the Long Course Extensometer with a precision of 0.01 mm also installed on the device |
| Performing fundamental repairs and extensometer installation on the Manufacturing of Gotech Company | ||||||||||||||||||||
The success of craftsmans and engineers of the company and overcome sanctions
The company’s engineers, with its endless effort, were able to repair funds on Gotech Taiwan, and return this device back to the quality control test process. Also, the engineers at the request of the employer on the exposure installed on the device also carried out the main repairs and synchronized with the company’s construction software that has increased the capabilities of this device |
| Obtaining certificate approval of the equipment for exporting equipment from Turkak | ||||||||||||||||||||
Regarding repeated views of Turkak company from several Turkish companies, the company will validate and perform various tests for the certificate of approval of quality control testing devices
Due to the extensive exports of the company to Turkey to Turkey, Turkak launched deep inspections and studies on the quality and approval of the manufacturing devices of the company, and during repeated views of several factories and conducting various tests on devices. By the company and ensuring the accuracy of measurement and high quality of the company’s equipment, they were issuing a certificate of approval of the company’s export devices
Once again, the company’s electronics industry was able to get out of the hard-faced test, and this was not possible, except with the effort and effort of the engineers and industry industry, the company’s electronics industry
| Perform fundamental repairs and extensometer installation on IPT Tanel | ||||||||||||||||||||
And once again the corner of the success of the craftsman and engineers of the company
The company’s engineers, with its endless effort, were able to make fundamental repairs on the German IPT, and return this device to the quality control test process. Sanaf engineers also installed high precision extensor on the application of the employer, which has increased the capabilities of this device |
| Laboratory extruder to order Tabriz petrochemical | ||||||||||||||||||||
With its attempts, the company succeeded in building a laboratory extruder to produce catalysts. This laboratory extruder was made up of Tabriz Petrochemical Company in the shortest possible time, and this was not possible, except with the effort and effort of the research and development unit of the company’s electronics industries that were able to succeed with its high practice and technical knowledge. Successful. This device was first built in Iran by the company
| Basic Repair and Update MFI Ray-Ran | ||||||||||||||||||||
With the great efforts of experienced and experienced engineers, the sanctions on the sanctions against Iran. The device produced by the Ray-Ran company, which was not possible to provide its service by the manufacturer because of the existence of sanctions. This was not possible, except for patience and patience of the Bridge of Paul, who trusted the MFI company with trust in their MFI device
The device update is based on this basis, in addition to calculating the molten flow index, the ability to calculate the density of polymeric materials is automatically. This has been done for the first time in our beloved country
And this is the only corner of the capabilities and capabilities of the experienced and experienced company of the company
